Make a fun space meant for big smiles 😀 with a DIY photobooth background made of paper plates! With a little prep work, this photobooth backdrop goes up quickly and will save you tons of 💲💆👏👍.
Emoji Party – DIY Paper Plate Photobooth
- Black, Red and Yellow Paper Plates
- Painter’s Tape
- Optional: Red and Black Cardstock (to create designs)
- Optional: Photo Booth Props
Step 1: Lay out your design on the floor to decide the arrangement. If desired, create additional designs with cardstock.
Step 2: Decide the tallest height for your photobooth. Peel one long piece of painter’s tape and lay on the wall with the sticky side out. Use two smaller piece to adhere it in place.
Step 3: Stick your paper plates onto the wall. Tip: Start with the center plate and place the others to the left and right.
Step 4: Continue these steps to arrange each row of the photobooth. Once your design is complete, you can use extra pieces of tape behind the plates to secure and remove any pieces that stick out on the sides.
Station fun props on a small table nearly. Encourage guests to choose their favorite accessory and give a big smile to the camera!